Property Repair Systems

01626 331351

Timber Repair Splices - ready made Kits including the timber to original size

SITE INDEX

• Structural Timber Beam Manufacture
• Structural Epoxy Pouring Resin
• Timber Beam repairs
• Structural Injection Resins
• Timber Beam strength upgrading
• Roof timber repairs
• Roof mold growth
• Timber frame repairs
• Rods and connectors
• Dry Rot detection and diagnosis
• Boron treatment
• Joist End Repairs and Joist Splices
• Request Quotation Form - Timber Repairs

SHOPS

• TIMBER REPAIR & TREATMENT SHOP
• BORON TREATMENTS SHOP
• DAMPNESS PRODUCTS SHOP
• EPOXY REPAIR RESINS SHOP
• JOIST REPAIR KITS SHOP
• MEMBRANE FOR DAMP WALLS & FLOORS SHOP
• MOLD SHOP - prices and ordering
• TANKING SHOP - prices and ordering
• TIMBER REPAIR SHOP
• WOODWORM TREATMENT SHOP
• SPECIAL OFFERS SHOP

To conserve timber and avoid using expensive steel beams call: 01626 331351 and talk to Angela, Andy or David

Timber Resin Repair, using the Patented Timber-Resin Splice (TRS) is easy to carry out and enables you to splice timbers using timber connectors (high tensile steel bars).

Ends and Mid span gaps - over 300mm lost - fit a Timber-Resin Splice - made to measure - INSTANT ESTIMATE - 01626 331351

Ends and Mid span gaps - under 300mm lost - shutter small gaps or small end defects and fit Rebar (epoxy coated steel), pour in Structural Epoxy Pouring Resin.

Ends above a decorative ceiling - fit a 'Save a Ceiling' Timber-Resin Splice - made to measure, 45 degree face and back angle allow an easy, sliding fit without disturbing the ceiling below - INSTANT ESTIMATE - 01626 331351

Carrier beam repair after Dry Rot - Timber-Resin Splice Type C

Log House, Ireland - penetrating dampness had destroyed some of the log ends - Wet Rot had set in. These were replaced using specially cut repair log pieces, in Douglas Fir, designed to be end connected, using eopxy-glass dowels and Thixotropic Injection resin.

Joists with Wet Rot in the bearing ends - ceiling left in place

Splicing wood beams can be carried out using timber connectors, supplied with resins, or as a Timber Resin splice (TRS) where we supply a complete Kit of parts, including the timber beam itself, usually with the connectors factory fixed. Splicing timber is easy using either technique - you can carry out beam repair, joist repair and complete beam replacement. New beams in laminated timber can be supplied in several parts, in order to avoid lifting problems and access difficulties.

Repairs | Beams | Roof | Mold | Dry Rot | Privacy Policy | Returns Policy | Contact